Steel Hand Stamps – Reverse Singles
£5.90 – £6.80
Pryor’s Reverse steel hand stamps are now available as single items, so if you only need a few characters, you can buy them here. Information about our full sets of reverse hand stamps can be found here
All single metal hand stamps are made from chromium tool steel and hardened to between 58-62 Rockwell C and then tempered at the striking end to between 32-40 Rockwell C giving maximum safety in use. Manufactured in Sheffield, England, under stringent BS EN ISO 9001:2015 quality controls and exacting standards.
When you look at the engraved character on a standard hand stamp, the letter is a reflection /reverse of how it is indented.
Hardened and tempered to precise limits, nickel plated for rust protection for maximum safety in use and long productive life.
Minimum order quantity of 5. This can be a selection of 5 different Hand Stamps.
- Size Chart
- Safety Info.
Size Chart
Reverse steel hand stamps are available in a range of sizes, please use the chart below if you require detailed size information
Character Height – measured from the crest of the engraving as shown.
| Character Height (H) | Stamp Length (C) | Square Section (B) | Square Section (A) | ||||
| Metric | Imperial | Metric | Imperial | Metric | Imperial | Metric | Imperial |
| 1.5mm | 1/16″ | 63.50mm | 2.1/2″ | 6.35mm | 1/4″ | 6.35mm | 1/4″ |
| 2.0mm | 5/64″ | 63.50mm | 2.1/2″ | 6.35mm | 1/4″ | 6.35mm | 1/4″ |
| 3.0mm | 1/8″ | 63.50mm | 2.1/2″ | 6.35mm | 1/4″ | 6.35mm | 1/4″ |
| 4.0mm | 5/32″ | 70.0mm | 2.3/4″ | 9.50mm | 3/8″ | 9.50mm | 3/8″ |
| 5.0mm | 3/16″ | 70.0mm | 2.3/4″ | 9.50mm | 3/8″ | 9.50mm | 3/8″ |
| 6.0mm | 1/4″ | 70.0mm | 2.3/4″ | 9.50mm | 3/8″ | 9.50mm | 3/8″ |
Safety Info.
Safety note: As with all striking tools, we recommend the use of appropriate safety protection.
Safety glasses and gloves should we worn at all times when striking metal for marking purposes
